Guide on replacing Compaq PK13HR60800 keyboard

You may sometime meet the problem that the laptop keyboard on your laptop broken, it would cost a lot of money if you buy a new one or get repaires by someone else, so why not do it yourself, it may not like what you think, if you find the way, to repair the Compaq Laptop Keyboard is very simple. We presumed it to be a complete Compaq PK13HR60800 keyboard replacement job so for your benefit, we detailed the procedure for getting the Compaq PK13HR60800 keyboard off the laptop.
Tools required for Compaq PK13HR60800 Keyboard replacement are basically a Phillips head screwdriver of suitable dimensions and a narrow, flat blade or similar prying tool. We started out by turning the laptop over and removing the laptop battery. The laptop battery is located on the back edge and has a thumb-operated spring-loaded latch on the bottom surface of the laptop. The laptop battery withdraws to the rear.
Next we needed to remove the Compaq PK13HR60800 keyboard retaining screw which (IIRC) is marked with a small laptop keyboard legend. It is found roughly centrally on the underside of the laptop. Note that we had actually forgotten to remove the laptop battery at this point /me smacks hands all round. After putting the screw somewhere safe, we turned the laptop back over and with the lid closed, removed the hinge-cover retaining screws from the rear of the laptop.
Once fully open, we used the prying tool to carefully lift the hinge covers which are an integral part of the upper cover on the laptop. The whole cover should hinge from the Compaq PK13HR60800 keyboard side. We lifted the cover slightly and withdrew it away from the Compaq laptop keyboard, towards the screen. The cover just removed acted as a secondary retaining feature for the upper edge of the laptop keyboard. The Compaq PK13HR60800 keyboard was lifted from the edge nearest the lcd screen, slight screenwards motion was employed to release the Compaq PK13HR60800 keyboard from the lower edge. The Compaq PK13HR60800 keyboard ribbon cable is now visible. The ribbon is fastened using a black locking tab/collar.
The laptop keyboard could now be fully removed. The exposed internals of the laptop at this point are shown below.
The Compaq PK13HR60800 keyboard refitting procedure is the reverse of the removal procedure. Special care is to be taken when re-seating the ribbon cable and cover clips. This article is about how to replace Compaq PK13HR60800 keyboard, of course, you can also use it to replace other laptop keyboard, Compaq laptop keyboard,such as:

See more laptop accessories information on feevoo.com, or just visit here: Dell 06G356 AC Adapter(Input: AC100-240V (worldwide use)
Output: DC20V 4.5A
Power: 90W)
Outlet: 3-prong
Connecter size:
Special 3 hole tip )
Dell PA-1900-02D AC Adapter(Input: AC100-240V (worldwide use) Output: DC19.5V 4.62A Power: 90W)
Sony VGP-AC16V13 AC Adapter(Input: AC100-240V - 50/60HZ (Worldwide Compatible) Output: DC16V 4A Power: 64W )
Dell PA-1650-05D AC Adapter(Input: AC100-240V (worldwide use)
Output: DC19.5V 3.34A)
Dell PA-12 AC Adapter (Input: AC100-240V (worldwide use)
Output: DC19.5V 3.34A )
hp 402018 001(hp 402018 001)
hp 381090 001(hp 381090 001 )
hp 417220 001(hp 417220 001)